English > Development
Kroozbox - PVD to media theatre solution
Chelli:
found the problem it wasn;t with krozebox but assigned the wromg drive location on PVD so rescanned that and restarted the web browser again plan on using sp;ittimg the signal so can run KKroozebox straight thrru the HDMI or Component inputsof the TV set
Would be better if I could just use THE DSM520 so krrp checking into that for me
know that tigerripper keeps recording youtube videos that are being sent directly to The DSM 520 though
Nono:
Update to kroozbox done to version 2.0.
Can be download at same place at:
http://www.omertron.com/pch/node/77
* Better display + more control on template + a bunch of fixes.
Paul T:
Hi All, not sure where to start with this.
I am using Popcorn pointing towards a PC containing all my films on local drive S: Database using PVD and Kroozebox to display the films. 95% films are .ISO everything works well and plays with no problems
My S: drive is running out of space. I cannot add to it as it is at the XP max of 2TB
I need to create a new drive, say a R:. What is the best way to get it to integrate with my exising setup ? Ideally films on both drives should be display at the same time but I am not sure if I need to/how to configure Kroozebox to work with the 2 Drives. They both be local drives on the same PC.
Any Ideas ?
Regards
Paul T :-\
Nono:
If you are using PVD on the same machine as Kroozbox, you shouldn't have to do anything for anything but ISO. i.e if the drives saved in the path of the film in PVD are seen by Kroozbox.
Now for ISO, that's an issue. Not for Kroozbox per say but for the PCH that cannot mount two share drive at the same time and that doesn't have automounting of SMB share.
What you have right now is "MyShare" property in globalParam.properties set to the name of PCH share (pointing to your S:/ drive) and "dbaseMediaRoot" in kroozbox.properties set to "s:/".. right? or are you using MMLinkRelocation.properties file?
Let me know details of your config and we will expand on solution. But, in any case (unless there was something new about share in the newest PCH firmware) you will have to manually switch share on the PCH depending on the movie you want to see.
coolmani:
--- Quote from: Paul T on March 23, 2009, 12:51:50 pm ---Hi All, not sure where to start with this.
I am using Popcorn pointing towards a PC containing all my films on local drive S: Database using PVD and Kroozebox to display the films. 95% films are .ISO everything works well and plays with no problems
My S: drive is running out of space. I cannot add to it as it is at the XP max of 2TB
I need to create a new drive, say a R:. What is the best way to get it to integrate with my exising setup ? Ideally films on both drives should be display at the same time but I am not sure if I need to/how to configure Kroozebox to work with the 2 Drives. They both be local drives on the same PC.
Any Ideas ?
Regards
Paul T :-\
--- End quote ---
Paul
Did you figure out the solution to this problem? I'm going through the same thing now and I'm trying to figure out the solution.
Stay cool
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version